Carell Industrial Parmigiani 480V Three Phase 5” x 5/8” Universal Double-Pinch Angle Roll Planet 30

Carell Industrial Parmigiani 480V Three Phase 5” x 5/8” Universal Double-Pinch Angle Roll Planet 30 is a Carell Industrial Solutions product in the Plate Roll collection.

Product Details

• Shafts Diameter (upper & lower): 5.5”
• Bending rolls diameter: 15.5” nominal
• Rolling speed – hydraulically variable: 0-23 fpm
• Total installed power – hydraulic unit: 30 HP
• Description
• Carell’s Planet 30 5” Angle Roll with Digimatic Programmable LED Controls includes infinitely variable rolling speed, 6-directional hydraulic lateral material guides, and Stradivari CNC software.
• Features
• Combination designed for working with vertical and horizontal working planes
• N° 3 driving rolls (all 3 rolls driven)
• Rolls driving by n° 3 low speed, high torque hydraulic motors + 3 planetary reduction units
• Infinitely variable rolling speed from control panel
• Fully hydraulic peripheral speed compensation between top and lower rolls
• Independent hydraulic adjustment of both lower rolls (for double pre-bending)
• Hydraulic-unit with pilot operated check valves to maintain constant lower rolls position during bending under extreme loading
• Shafts in alloyed steel (heat treated), journaled in long life grease lubricated self-aligning spherical roller bearings
• Bending rolls in high tensile alloyed forged nickel chrome steel, induction hardened
• N° 2 Lateral guiding rolls, each one adjustable in 6 directions Axial thrust: hydraulically powered operated by push-buttons from control panel Carriage stroke: hydraulically powered operated by push-buttons from control panel Angular tilting: hydraulically powered operated by push-buttons from control panel Each guiding roll is complete of one roll for bending angle-iron leg-in
• Axial thrust: hydraulically powered operated by push-buttons from control panel
• Carriage stroke: hydraulically powered operated by push-buttons from control panel
• Angular tilting: hydraulically powered operated by push-buttons from control panel
• Each guiding roll is complete of one roll for bending angle-iron leg-in
• Total protection from overloads by hydraulic maximum pressure overload relief valves
• Electric/hydraulic components by world renowned OEM manufacturers
• Multi system safety device for instantaneous stopping of all the machine movements
• Operator control console, low voltage 24 VAC, designed for ‘ease of service’ and mobile with trailing lead to allow optimum operator convenience and safety
• Operator’s use and service manual
• Parmigiani HTT (High Transmitted Torque)
• The three hydraulic motors that drive the rolls, are specially interconnected (by Carell’s HTT exclusive system) in order to obtain the best speed compensation (related at profile size and bending radius) and distribution of the couple on each roll during the bending operation. This externally set adjustment is conveniently located on the side of the machine and does not require a slip clutch adjustment which can be a time consuming and dirty process. In this way, the hydraulic system transmits the power directly to each roll without power losses.
• Digimatic NC Control
• Operator’s panel with 7” wide screen
• High resolution full color display, touch screen in industrial polycarbonate
• Two controlled axis: left and right bending rolls (X and Y)
• Two possible ways of programming: editing and play-back mode
• Memory capacity: up to 1,000 programs of 60 steps each
• Stradivari CNC Control
• 3D CAD
• 19” full color touch screen HMI + PLC, 3 Axis CNC
• Auto-calculating input and 3D CAD graphics
• Specifications
• Electrical Requirements: 480V Three Phase 60Hz
• Machine Dims: 80” x 76” x 61”
• Approx Weight: 12,000 lbs
• Capacities
• Flat bar on edge Max Size: 5½” x 1-1/8” Min ID: Ø55”
• Max Size: 5½” x 1-1/8”
• Min ID: Ø55”
• Square bar Max Size: 3¼” Min ID: Ø46”
• Max Size: 3¼”
• Min ID: Ø46”
• Angle Leg-Out Max Size: 5” x 5” x 5/8” Min ID: Ø65”
• Max Size: 5” x 5” x 5/8”
• Min ID: Ø65”
• Angle Leg-In Max Size: 5” x 5” x ½” Min ID: Ø75”
• Max Size: 5” x 5” x ½”
• Min ID: Ø75”
• Tee Leg-Out Max Size: 5” x 5” x ½” Min ID: Ø65”
• Tee Leg-In Max Size: 5” x 5” x ½” Min ID: Ø65”
• Tee Vertical Max Size: 5” x 5” x ½” Min ID: Ø45”
• Min ID: Ø45”
• Flat Vertical Max Size: 8-5/8” x 2” Min ID: Ø45”
• Max Size: 8-5/8” x 2”
• I Beam, easy way Max Size: S 10” x 35” Min ID: Ø45”
• Max Size: S 10” x 35”
• C Legs-Out Max Size: C 10” x 30” Min ID: Ø40”
• Max Size: C 10” x 30”
• Min ID: Ø40”
• C Legs-In Max Size: C 10” x 30” Min ID: Ø45”
• H Beam, easy way Max Size: W 8” x 21” Min ID: Ø40”
• Max Size: W 8” x 21”
• Square Tube Max Size: 5” x ¼”
• Max Size: 5” x ¼”
• Rectangular Tube Max Size: 6” x 3” x ¼”
• Max Size: 6” x 3” x ¼”
• Round Bar Max Size: 3¾” Min ID: Ø45”
• Pipe, Sch 40 Max Size: 5” Min ID: Ø60”
• Max Size: 5”
• Min ID: Ø60”
• I Beam, hard way Max Size: S 6” x 17.25” Min ID: Ø120”
• Max Size: S 6” x 17.25”
• Min ID: Ø120”
• H Beam, hard way Max Size: W 5” x 19” Min ID: Ø120”
• Max Size: W 5” x 19”
• Optional Add-Ons
• Rolls and tooling for bending beams the hard way
• Roll sets for bending tubes & pipes
• Shaped pulling rolls for “I” and “S” beams (w/tapered flanges)
• Tooling for bending channels on edge, ‘hard way’ pos. 19

Specifications

• Manufacturer: Carell Industrial Solutions
• SKU: Planet 30
• Shipping Method: Flatbed
• Weight: 12,500 lb
• Dimensions: 85 × 80 × 65 in