Campro USA 220V Three Phase 126″ x 82″ x 31″ Double Column Shop Bridge Mill PV-3221

Campro USA 220V Three Phase 126″ x 82″ x 31″ Double Column Shop Bridge Mill PV-3221 is a Campro USA product in the Mill Drills collection.

Product Details

• Spindle taper: CAT-50 Big Plus
• X axis travel: 125.98”
• Y axis travel: 82.68”
• Z axis travel: 31.49”
• Description
• High Accuracy and High Rigidity
• 25 hp, 6,000 rpm Japanese made Gear-head Spindle
• 34 hp, 10,000 rpm Built-in Motor Spindle (Optional)
• Single unit (monobloc) bridge
• Largest 32-tools ATC system as standard
• Dual built-in casting chip screw removal system with chip conveyor
• Roller type linear guideways on X-axes and Y-axes
• Automatic lubrication unit with intelligent pressure failure detection function provides reliable lubricator supply for cost saving
• Big coolant tank with high pressure pump provide the most efficient coolant circulation
• All axis lubrication oil is kept away from the coolant which can extend coolant oil life for environmental protection
• Features
• Fanuc Oi-MF Control (Package B)
• AI APC Contour Control
• 6,000 RPM Spindle with Gear Head (10,000 RPM Built In is optional)
• Spindle Oil Chiller
• Powerful 25 HP (30 min) high torque spindle motor
• High Column (37.4” Spindle nose to table)
• Cartridge Spindle Design
• CAT50 Big Plus Spindle
• 1,000 PSI Coolant thru spindle prep
• Spindle Air Blow
• Rigid tapping
• Twin Arm 32 Tool ATC
• Portable Manual pulse generator
• Program and data protection key switch
• Massive One-piece Meehanite cast iron bed
• X & Y Heavy Duty Linear Guides
• Z axis Heavy Duty Box Way
• Chip Auger
• Chip Conveyor (W/ Bucket)
• Double Anchored, Pre-tensioned Ballscrews
• Fast X & Y – 787, Z – 630 IPM Rapid Traverse rate
• Flood coolant with large coolant tank
• Work light
• Heat exchanger for Electrical Cabinet
• Automatic Lubrication Unit
• Instruction manual, parts list, and electrical diagram
• Fanuc operator and maintenance manuals
• One-year Parts warranty: Parts
• Two-year NC Control Warranty: Parts and Labor by control builder
• Specifications
• Table Table loading area: 118.11” x 66.93” Allowable table load: 17,637 lbs. T Slots, width x spacing x # slots: 0.86” X 9
• Table loading area: 118.11” x 66.93”
• Allowable table load: 17,637 lbs.
• T Slots, width x spacing x # slots: 0.86” X 9
• Spindle Spindle taper: CAT-50 Big Plus Spindle RPM: 6,000 RPM Spindle Power Output (max 30 min.): 25 HP Spindle torque (max 30 min): 459.5 ft. lbs. Spindle Driving Method: Gear Type
• Spindle RPM: 6,000 RPM
• Spindle Power Output (max 30 min.): 25 HP
• Spindle torque (max 30 min): 459.5 ft. lbs.
• Spindle Driving Method: Gear Type
• Feed X axis travel: 125.98” Y axis travel: 82.68” Z axis travel: 31.49” Spindle nose to table surface: 7.87” – 39.37” Distance between Columns: 86.61” Rapid Traverse X axis: 472 IPM Rapid Traverse Y axis and Z axis: 590.5 IPM
• Spindle nose to table surface: 7.87” – 39.37”
• Distance between Columns: 86.61”
• Rapid Traverse X axis: 472 IPM
• Rapid Traverse Y axis and Z axis: 590.5 IPM
• Automatic Tool Changer Number of Tools: 32 Tool Shank: CAT 50 Big Plus Max. Tool Dia.: 4.92 Max. Tool Dia. With adjacent pocket open: 8.46 Max. Tool Length: 17.38 inches Max. Tool Weight: 44.1 lbs. Tool Selection Method: Random
• Number of Tools: 32
• Tool Shank: CAT 50 Big Plus
• Max. Tool Dia.: 4.92
• Max. Tool Dia. With adjacent pocket open: 8.46
• Max. Tool Length: 17.38 inches
• Max. Tool Weight: 44.1 lbs.
• Tool Selection Method: Random
• Tank Capacity Coolant Tank: 53 Gallons Lubricating Tank: 0.5 Gallons Hydraulic Tank: 30 Gallons
• Coolant Tank: 53 Gallons
• Lubricating Tank: 0.5 Gallons
• Hydraulic Tank: 30 Gallons
• Power Supply Electric Power Supply Voltage / KVA: 220V 3 Phase (60HZ) / 40 Minimum Air Supply: 85 PSI (3/8 ID Supply Hose)
• Electric Power Supply Voltage / KVA: 220V 3 Phase (60HZ) / 40
• Minimum Air Supply: 85 PSI (3/8 ID Supply Hose)
• Feed and Accuracy Cutting feed rate: 393 IPM Least command increment: 0.001mm Positioning accuracy: +/- 0.00020" (full stroke) Repeatability: +/- 0.00008"
• Cutting feed rate: 393 IPM
• Least command increment: 0.001mm
• Positioning accuracy: +/- 0.00020" (full stroke)
• Repeatability: +/- 0.00008"
• Machine Floor Space Required (L x W): 346.5" x 196.85" Height: 155.51” Machine Weight: 77,162 lbs.
• Floor Space Required (L x W): 346.5" x 196.85"
• Height: 155.51”
• Machine Weight: 77,162 lbs.
• Options
• CAT-40 I.D.D. Spindle
• 10,000 RPM Built-In Motor Spindle
• 40 / 60 Tools Chain Type ATC
• Coolant Through Spindle
• Deep Hole Adaptor
• High Pressure Pump
• Linear Scales
• CNC Rotary Table
• Automatic Tool Length Measurement
• Workpiece Measurement
• Milling Head
• Air Condition
• CE Modification
• Transformer

Specifications

• Manufacturer: Campro USA
• SKU: PV-3221
• Shipping Method: Flatbed
• Weight: 77,262 lb
• Dimensions: 352 × 102 × 161 in